Home / Additive Masterbatches

Machine and Screw Purging Compound

Machine and Screw Purging Compound

In plastics processing plants, one of the biggest hidden cost items is the combination of long machine stoppages during color and material changeovers, bags of changeover scrap, and black speck defects caused by burnt (carbonized) residues building up on the screw/barrel surface. Conventional cleaning with standard natural polymer (resin) both takes hours and fails to completely remove old color left in dead spots in the barrel, check valve and hot runner corners.

The Colorex Machine and Screw Purging Compound series consists of advanced-technology cleaning granules specially formulated for injection, hot runner, blown/cast film, pipe, profile and blow molding machines, providing deep cleaning without damaging the barrel and screw. In black-to-white or dark-to-transparent changeovers, it reduces downtime and changeover scrap by 50% to 80%, directly increasing your production efficiency.

Explore all our product groups on the Colorex Masterbatch homepage.

Colorex Machine and Screw Purging Compound Types

1. Chemically Active Purging Compound (Chemical Purging Compound)

  • Working PrincipleOnce processing temperature is reached, the active cleaning components engage chemically; they weaken the molecular bonds of old pigment, additive and burnt polymer layers stuck to barrel, screw and hot runner surfaces and strip them from the surface.
  • Technical AdvantagesBecause it contains no solid abrasive minerals, it passes safely through narrow-channel hot runner systems, valve pins and fine nozzles.
  • Recommended ApplicationsHot runner injection molds, thin-wall packaging, changeovers to transparent parts (PET, PC, PMMA, clear PP) and sensitive medical/optical production.

2. Mechanical and Hybrid (Chemical + Mechanical) Purging Compound

  • Working PrincipleCombines controlled chemical dissolving power with a soft mineral scrubbing action that does not scratch the metal surface (non-abrasive).
  • Technical AdvantagesDelivers maximum stripping power for heavy carbonization, severe black speck problems, screws that have not been cleaned for a long time and demanding dark-to-white changeovers.
  • Recommended ApplicationsStandard injection molding machines, pipe, profile, sheet and film extrusion lines, and blow molding machines (including accumulator-head types).

3. High-Temperature Engineering Polymer Purging Compound (260 °C – 360 °C)

  • Working PrincipleProduced with special high-heat carriers that remain stable at high processing temperatures without smoke, odor or self-ignition.
  • Recommended ApplicationsColor/material changeovers of PA (polyamide / nylon), PC (polycarbonate), PET, PBT, POM, PPS, PSU and glass-fiber-reinforced engineering plastics.

4. Machine Shutdown and Protection (Shutdown / Sealing) Solution

  • Working PrincipleLeft in the barrel over weekends, at shift ends or during long stoppages, it cuts off contact between air (oxygen) and the hot metal and polymer residues.
  • Technical AdvantagesPrevents oxidation-related black specks and burning when the machine is reheated, enabling a fast and clean return to production at the first morning start-up.

Key Benefits for Your Production Plant

  • 50–80% Shorter Changeover TimeReduces color and material changes that take hours to minutes, increasing your overall equipment effectiveness (OEE).
  • Major Savings in Raw Material LossEliminates the tens of kilograms of expensive production resin spent cleaning the barrel; the cost of the purging compound stays far below the material and time saved.
  • Definitive Solution to Black Specks and Burn MarksStrips carbonized residues that accumulate in dead spots on screw flights, the check valve (non-return ring), the nozzle and the die head.
  • Reduces the Need to Pull the ScrewWith periodic use it prevents build-up inside the barrel, significantly reducing how often machines must be dismantled for mechanical cleaning and the maintenance labor involved.
  • Complete Safety for Chrome-Plated Screws and BarrelsFormulated with components far softer than barrel/screw steel, so it causes no wear, scratches or loss of tolerance.
  • Low-Odor, Smoke-Free OperationProduced with safe formulations that protect operator health and air quality in the production area.

Main Applications and Processes

  • Injection Molding (Cold and Hot Runner)Dark-to-white/transparent changeovers, check valve cleaning, and color changes inside hot runner manifolds and nozzles.
  • Film Extrusion (Blown and Cast Film)Removal of burnt material, gels and black specks inside the die and color changes on multilayer (co-ex) and monolayer film lines.
  • Pipe, Profile and Sheet ExtrusionFast changeover from black or dark shades to light colors and die head cleaning on PE100, PPRC, PVC and ABS/PS lines.
  • Blow MoldingRemoval of dead spots and streaks (color traces) on accumulator-head and continuous-extrusion blow molding lines.
  • Compound and Masterbatch ProductionClean, fast changeover from heavily pigmented batches to light-colored batches on twin-screw extruders.

Basic Application Steps (Quick Field Guide)

On Injection Molding Machines

  • Empty the current production material completely from the barrel and clean the feed hopper.
  • Retract the injection unit from the mold (if the hot runner is not being cleaned).
  • Feed Colorex Purging Compound directly (unmixed) into the hopper in an amount of roughly 1 to 2 times the machine's barrel capacity.
  • Set back pressure to medium-low and screw speed to medium-high, and shoot the material in short intervals. If there is heavy carbonization, let it soak in the barrel for 3–5 minutes, then purge it out at high speed.
  • When the melt comes out completely clean, feed the new production material to flush the purging compound out of the barrel and start series production.

On Extrusion Lines

  • Lower the machine pressure to a safe level; if you are using a mechanical/hybrid purging compound, always remove the fine screen pack.
  • As the previous material runs out, feed Colorex Purging Compound and gradually raise and lower the screw speed (surging effect) to accelerate the removal of layers inside the barrel.
  • When the material leaving the die is clean, feed the new material and purge out the compound completely, then install a new screen pack and start production.

Colorex Laboratory Assurance

Every batch of Colorex Machine and Screw Purging Compound is tested in our laboratory for high performance and equipment safety:

  • Thermal Stability CheckVerification that it does not self-ignite, gas excessively or produce odor within the specified temperature window.
  • Stripping Power and Residue-Free TestChecks of dark-to-white changeover performance and easy flushing with new material on pilot extruder and injection lines.
  • Food Compliance and Chemical SafetyVerification of composition against the relevant food-contact, REACH and RoHS requirements.

Applications and Effects on the Final Product

Applications / Application Areas

  • Dark-to-white and dark-to-transparent changeovers in injection molding, hot runner and nozzle cleaning
  • Removal of burnt material, gels and black specks inside the die on blown and cast film lines
  • Dark-to-light color changeovers on PE100, PPRC, PVC and ABS/PS pipe, profile and sheet lines
  • Removal of color traces on accumulator-head and continuous-extrusion blow molding lines
  • Changeovers from heavily pigmented to light-colored batches on twin-screw extruders

Affected Properties / Effects on the Final Product

  • Black specks and burn marks: Strips carbonized residues from the screw, check valve, nozzle and die head, so no black specks are carried into the product.
  • Color cleanliness: No traces or streaks of the previous color remain in the new batch.
  • Gels and surface defects: Eliminates surface defects caused by gels and burnt material inside the die on film and sheet lines.
  • Screw and barrel surface: Works with components softer than barrel and screw steel; causes no wear, scratches or loss of tolerance.
  • Working environment: The low-odor, smoke-free formulation protects operator health and air quality in the production area.

Effect on the Process and Production Line

  • Color and material changeover time is cut by 50% to 80%, increasing machine utilization.
  • Eliminates the loss of base resin otherwise used to flush the barrel.
  • Used periodically, it prevents build-up; screw pulls and maintenance labor are reduced.

Frequently Asked Questions

Page-specific technical questions and answers about Machine and Screw Purging Compound.

What is a Machine and Screw Purging Compound?
It is a cleaning compound in granular form, specially developed to quickly and safely strip old color, polymer and carbonized burnt residues that accumulate on the screw, barrel, check valve, nozzle and die heads of plastics processing machines (injection molding, extrusion, blow molding).
Why should I use a Purging Compound instead of cleaning with standard natural resin (e.g. clear PP or HDPE)?
Natural polymers cannot dissolve the pigment and burnt layers stuck to the barrel wall; they simply flow over them. That is why a dark-to-white changeover with natural resin takes hours, wastes tens of kilograms of material, and old color streaks or black specks keep appearing in parts even hours after production has started. Colorex Purging Compound detaches the adhered layers from the surface chemically and physically and expels them in a single pass.
Does a Purging Compound scratch the machine's screw, barrel or chrome plating?
No. Colorex Machine and Screw Purging Compound products are formulated with non-abrasive components whose Mohs hardness is far lower than that of barrel and screw steel (and of hard chrome/nitrided coatings). They never damage the metal surface.
What is the difference between a chemical and a mechanical purging compound?
Chemical purging compounds are activated by heat and weaken the bonds by which old polymer and pigment adhere to the metal surface; since they contain no solid minerals, they pass safely through hot runners. Mechanical (or hybrid) purging compounds physically scrub the screw and barrel surface with soft mineral particles; they are particularly effective against heavy carbonization and severe black specks.
Can a single purging product be used on all machines and all plastics in the plant?
General-purpose Colorex purging compounds cover the great majority of polyolefins and styrenics (PE, PP, PS, ABS, PVC, TPE) in the 160 °C – 280 °C range with a single product. However, for high-temperature engineering plastics processed above 280 °C, such as PC, PA, PET, PBT and PSU, or for narrow-channel hot runners, special high-heat / chemical grades should be used.
How much raw material and time does a Purging Compound save?
When applied correctly, color and material changeover times are reduced by 50% to 80% on average. A black-to-white changeover that requires 50–100 kg of material loss and 2 hours of downtime with natural polymer is usually completed in 15–25 minutes with 3–8 kg of purging compound.
For this product:Calculate dosageProduct selector

Stop Losing Hours and Bags of Raw Material at Every Color Change

Contact our technical team now for a sample of Colorex Machine and Screw Purging Compound, which cuts changeover scrap and downtime by more than half on your injection, hot runner, extrusion and blow molding machines.